Feel free to call us for more information
400-808-1508
Application:
● The rotary evaporator is mainly used for continuous distillation of a large number of volatile solvents under reduced pressure; especially for the concentration of the extract and the distillation of the receiving liquid during chromatographic separation, the reaction products can be separated and purified.
Main Features:
● Automatic lifting, simple structure, stable and reliable, laboratory operators can easily operate with one hand;
● Liquid crystal display controller, multi-group data display on one screen, menu-type operation interface, knob-type setting, simple and easy to understand, easy to observe and operate;
● PID controller, speed, temperature, time setting is simple and quick;
● Unique inclined double-layer serpentine coil design, the cooling area reaches 0.15㎡, and the maximum evaporation capacity can reach Max.22ml/min, ensuring that samples from a small amount to a large amount can be efficiently recovered;
● Double-layer high-efficiency condenser to prevent backflow design of evaporative condenser, and the position of the condenser can be adjusted;
● Professional sealing system design, high elastic PTFE material sealing ring, with high temperature resistance, corrosion resistance, durability and other characteristics, reduce the frequency of frequent replacement of sealing gaskets by laboratory operators, and more than double the service life of traditional manufacturers' sealing rings;
● Water bath/oil bath dual heating mode, external heating, convenient for users to clean the bath
Product Parameters: | |
Model | HR-21M |
Rotary speed | 20~300rpm |
Bath temperature control range | Water Bath :RT+5~99℃ Oil Bath:RT+5~180℃ |
Evaporation capacity | 22ml/min |
Speed setting | Knob+LCD display |
Lifting method | Manual |
Electric lift function | / |
Main motor | Brush less motor 8*4*0.2ml PCR tube |
Condenser | Snake-shaped condenser tube with condensation area of 0.15m², 1L rotary bottle, 1L collection bottle, TS29/38 bottle clamp, ball mill mouth S35/20 |
Vacuum Seal | PTFE+ Teflon coating |
Water bath material | Stainless Steel Corrosion Resistant Coating |
Heating power | 1000W |
Working temperature | 5~35℃ |
Bath size (inside)φ×H (mm) | φ230×130 |